Output waveforms:
sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, ECG wave, exponential rise, exponential fall, Lorentz pulse, Gauss pulse, Sinc pulse, half-wave, full-wave, Schumann wave, noise wave, and so on 15 kinds of waveforms
Power supply
DC4-9V, DC5V is recommended when using adapter, 3.7V lithium battery is recommended when using battery power.
Frequency range
sine wave 0.01Hz-500.00kHz (with further increase in frequency, the output amplitude will decrease), other waveforms 0.01Hz-100.00kHz (but does not limit the upper limit of the adjustable frequency, if the distortion and jitter requirements are not high, the use of frequency can be further increased).
Sine wave distortion
<1% below 1kHz, <0.5% above 1kHz
Output amplitude
Maximum ±10V (P-P)
DC offset
maximum ± 10V, with shutdown function
Saved
All setup parameters can be saved. there are filters can be turned on and off, can be well adapted to sinusoidal and pulse waveform output.
Package Dimensions
6.02 x 5.91 x 2.09 inches