✓No-Mix Formula: Ready to Use Instantly: Skip messy mixing! Our pre-mixed oil-based epoxy paint is ready right out of the can – perfect for DIYers to tackle garage, patio, or pool deck projects in minutes.
✓Water & Slip-Resistant Satin Finish: Safe in Wet Zones: Boasts a sleek satin sheen with dual protection: repels water to prevent pooling and adds slip resistance. Ideal for pool decks, garages, or patios where moisture is common.
✓Extreme Multi-Protection Shield: Resists water, scuffing, fading, cracking, peeling, plus defends against chemicals, mildew, and hot tire marks. A true all-weather barrier for high-traffic floors.
✓Indoor & Outdoor Versatility: Perfect for garages, carports, walkways, porches, pool decks (waterproof must-have!), and patios – one paint for every concrete surface, inside or outside.
✓Notes: Thoroughly clean the floor surface. Fill uneven areas and cracks on the floor with crack filler. If the floor contains excessive dust, apply one coat of primer sealer first. If the floor surface lacks sufficient hardness, apply a primer sealer first, then add a floor paint intermediate coat blended with quartz sand. For cement floors with adequate hardness, apply our coating directly after thorough cleaning and complete drying. Apply two coats in total.
✓Harmless to the human body: During application, the VOC content is only 2 g/L and formaldehyde content is 8 mg/kg, both far below the national standard limits. After the product is fully cured (5 days), VOC and formaldehyde emissions drop to zero.
✓Important Precautions ‑ When mixing all A+B+C components at once, apply the blended coating within 15‑20 minutes. The mixture will cure and turn unworkable past this pot‑life window. ‑ With 20 years of specialized coating‑manufacturing experience, we have zero records of product failure caused by factory‑side defects. Please read the user manual fully and strictly follow the specified mixing ratio for A, B & C components. ‑ As this is a liquid product, slight leakage could happen during shipping. Small amounts of leakage do not impact product performance and the coating can still be used. Please reach out to us immediately if significant leakage occurs; we will resolve your issue properly.