🏪 Sold by
Store4PC
📦 Fulfillment
Fulfilled by Amazon
🚚 Shipping
Free Shipping
Product Details
✓THREE NVMe SSDs AND 10GbE IN ONE PCIe SLOT: Add three M.2 NVMe drives and a 10 Gigabit Ethernet port to a NAS build, homelab, server or desktop PC from a single PCIe 3.0 x4 or wider physical slot. SSDs are sold separately.
✓NO BIFURCATION, WIDE DRIVE SUPPORT: Installs in any physical PCIe x4 or larger slot with no PCIe lane splitting and no UEFI bifurcation support needed. Takes M.2 PCIe NVMe SSDs in 2230, 2242, 2260 and 2280 lengths, PCIe Gen 2.0 through Gen 5.0, and supports drives of at least 8TB per slot.
✓MEASURE YOUR CLEARANCE BEFORE YOU ORDER: This is an add-in card with a pre-installed heatsink covering the M.2 slots, so it takes up more room than a bare M.2 adapter. Check that you have an open PCIe 3.0 x4 or wider physical slot and clear space around it inside your case, chassis or NAS enclosure. Compact and sealed NAS units and small-form-factor cases are often too tight for a card of this size.
✓10GbE PORT, AND WHAT IT DOES NOT DO: The built-in Marvell-based port is a standard 10 Gigabit wired network connection, backward compatible down to 100Mbps with CAT 5e or better cabling and a compatible switch. It does NOT link straight to the M.2 slots - the drives appear to your system as ordinary NVMe SSDs, and your operating system or NAS software decides what gets shared over the network.
✓TOOL-FREE COOLING, BANDWIDTH STATED PLAINLY: A pre-installed aluminum heatsink with thermal padding keeps drives cool through sustained transfers, with no tools needed at install. Each M.2 slot runs at up to x2 PCIe 3.0 bandwidth and the whole card totals x4, so the three drives share one x4 link - built for capacity and always-on NAS work rather than single-drive peak speed.