4 Gallon Epoxy Colored Sand Self‑Leveling Floor Paint, Marble‑Effect, 100% High Solids, 5.5:1 Sand‑Aggregate Ratio, 6H Hardness,1.5mm Finished Thickness (Cyanyan blue,100 Sq.Ft)

STF ShangTianFeng

4 Gallon Epoxy Colored Sand Self‑Leveling Floor Paint, Marble‑Effect, 100% High Solids, 5.5:1 Sand‑Aggregate Ratio, 6H Hardness,1.5mm Finished Thickness (Cyanyan blue,100 Sq.Ft)

Name: 4 Gallon Epoxy Colored Sand Self‑Leveling Floor Paint, Marble‑Effect, 100% High Solids, 5.5:1 Sand‑Aggregate Ratio, 6H Hardness,1.5mm Finished Thickness (Cyanyan blue,100 Sq.Ft)
Brand: STF ShangTianFeng
SKU: B0H6PML87Q
Price: 258.99 USD
Availability: InStock

✅ In stock

Grade

💤 Not a Deal

0/100

Current Price

$258.99

Listed $0.51

⚠️ Price may have changed. Last updated 24+ hours ago — confirm on Amazon.

Check Deal at Amazon

Price verified Sep 19, 2026 9:49 PM · Prices & availability subject to change

Is This a Good Price on Amazon?

💤 Not a Deal

💤Verdict: Not a Deal. Price is at or above historical norms. Best to wait for a sale.
➡️Pricing has held fairly steady, with no strong push in either direction.

How We Scored This Deal

Price Competitiveness 0/28

Recent Value 0/22

Market Standing 0/20

Deal Strength 0/20

Momentum 0/10

📝 Product Overview

🏪 Sold by 99ONELOVE

📦 Fulfillment Fulfilled by Amazon

🚚 Shipping Free Shipping

Product Details

✓No-Mix Formula: Ready to Use Instantly: Skip messy mixing! Our pre-mixed oil-based epoxy paint is ready right out of the can – perfect for DIYers to tackle garage, patio, or pool deck projects in minutes.

✓Water & Slip-Resistant Satin Finish: Safe in Wet Zones: Boasts a sleek satin sheen with dual protection: repels water to prevent pooling and adds slip resistance. Ideal for pool decks, garages, or patios where moisture is common.

✓Extreme Multi-Protection Shield: Resists water, scuffing, fading, cracking, peeling, plus defends against chemicals, mildew, and hot tire marks. A true all-weather barrier for high-traffic floors.

✓Indoor & Outdoor Versatility: Perfect for garages, carports, walkways, porches, pool decks (waterproof must-have!), and patios – one paint for every concrete surface, inside or outside.

✓Notes: Thoroughly clean the floor surface. Fill uneven areas and cracks on the floor with crack filler. If the floor contains excessive dust, apply one coat of primer sealer first. If the floor surface lacks sufficient hardness, apply a primer sealer first, then add a floor paint intermediate coat blended with quartz sand. For cement floors with adequate hardness, apply our coating directly after thorough cleaning and complete drying. Apply two coats in total.

✓Harmless to the human body: During application, the VOC content is only 2 g/L and formaldehyde content is 8 mg/kg, both far below the national standard limits. After the product is fully cured (5 days), VOC and formaldehyde emissions drop to zero.

✓Notes: 1.Thoroughly clean the floor surface. 2.Fill uneven areas and cracks on the floor with crack filler. 3.If the floor contains excessive dust, apply one coat of primer sealer first. 4.If the floor surface lacks sufficient hardness, apply a primer sealer first, then add a floor paint intermediate coat blended with quartz sand. 5.For cement floors with adequate hardness, apply our coating directly after thorough cleaning and complete drying. Apply two coats in total.