🏪 Sold by
Auto WIN
📦 Fulfillment
Fulfilled by Amazon
🚚 Shipping
Free Shipping
Product Details
✓DIAGNOSE INJECTOR PROBLEMS BEFORE REPLACING PARTS - Rough idle, misfires, hard starts or poor acceleration can point to injector problems, but guessing can get expensive. FOXWELL JT210 helps you visually inspect spray patterns, compare fuel flow, check for leaks and identify clogged, leaking or uneven-performing injectors on the bench—so you have more information before deciding whether to clean, reuse or replace an injector.
✓SEE SPRAY PATTERNS & COMPARE 2 INJECTORS SIDE BY SIDE - Stop guessing what is happening inside your fuel system. Two transparent graduated cylinders let you test two injectors simultaneously and visually compare spray pattern, atomization and fuel delivery. Spot uneven flow, weak spray and injector-to-injector differences that may be difficult to identify with basic electrical tests alone.
✓TEST → ULTRASONIC CLEAN → RETEST - Finding a dirty injector is only half the job. JT210 combines injector testing with heated ultrasonic cleaning, allowing you to diagnose performance, clean deposits and then retest the injector to see whether spray and flow improve. The 45°C / 113°F heated ultrasonic bath helps loosen stubborn deposits for a more complete bench-service workflow.
✓SIMULATE INJECTOR OPERATION FROM 100~9900 RPM - Go beyond a simple on/off injector check. Adjustable RPM simulation lets you observe injector response across different operating speeds without running the engine, while leak testing helps identify injectors that fail to seal properly. Multiple test modes give serious DIYers and mechanics more ways to evaluate injector condition before reinstalling it.
✓BUILT FOR 12V CAR & MOTORCYCLE INJECTORS - A practical 2-cylinder setup for home garages, serious DIYers, motorcycle owners and independent mechanics. Designed for conventional 12V fuel injectors and supplied with adapters for multiple injector types. **(NOT for diesel and GDI injectors).【IMPORTANT】We recommend the use of ready-to-use bottled test fluid or cleaning fluid, NEVER MIX THEM. Diesel, kerosene, or 99.9% isopropyl alcohol may be used as an alternative test spray solution. The test fluid and cleaning fluid must be used separately.