✓12V-48V Auto-Ranging 107dB Backup Alarm (No Jumper Needed) Broadband reverse beeper that auto-scales to system voltage — works on 12V pickups, 24V box trucks, 36V industrial stackers, and 48V electric forklifts without resistor mods or voltage selectors. Emits 103-111 dB(A) at 1 meter (typical 110dB ±3dB). Draws ~1A. Match your vehicle's reverse-lamp circuit voltage before ordering. Not a 3-wire relay module, not a backup camera, not a horn.
✓Universal 2-terminals Install — Red to Reverse +, Black to Ground Connect red lead to reverse lamp positive or reverse switch output, black lead to chassis ground. No relay, no additional module. Includes 3.25-inch industry-standard slotted bracket with 2-screw terminals. Mounts to frame rail, bumper, battery box, or rear crossmember. Reuse existing hardware or use supplied bracket holes.
✓Covers Class 3-8 Trucks, Vans, Forklifts, Buses & Heavy Equipment Engineered for Class 3-8 trucks, cargo vans, freight lorries, semi-trailers, forklifts, school buses, RVs, excavators, loaders, agricultural tractors, yard goats. One SKU replaces fleet-specific beepers across mixed-voltage yards.
✓IP67 Waterproof for Harsh Outdoor Conditions Sealed ABS housing with silicone gasket survives pressure washing, rain, mud, snow, and salt spray. Rated IP67 — dust-tight and waterproof to 1 meter immersion. Copper-alloy internal wiring resists vibration fatigue on rough terrain. Operating temperature range -40°F to 185°F.
✓107dB Penetrates Jobsite Noise — Confirm 2-terminals& Voltage Range Critical: This alarm is 2-terminals only (power + ground). If your vehicle requires a 3-wire unit with a separate trigger/ignition lead, this will not work. Also confirm your system voltage is 12-48V DC — not 6V, not 72V/80V industrial (some large forklifts exceed 48V). If installing on a 48V electric vehicle, verify the reverse circuit is 48V, not a separate 12V accessory circuit.